FAQ: What Do Paint Sprayer Tip Numbers Mean?

What is a 515 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

How do you know what size spray tip to use?

Understanding the Numbers

  1. The first digit is half of the fan width, the “5” in “517” equals a 10 inch spray fan width (5 x 2 = 10)
  2. The last two digits are the size of the tip opening in thousandths of an inch, the “17” in “517” means the tip hole size is. 017 inch.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

You might be interested:  Readers ask: How To Paint Sprayer Without Smoges?

What is a 315 spray tip used for?

The 315 tip is ideal for fence picket priming and painting. The 6” fan pattern minimizes overspray when spraying pickets.

How do I get a smooth finish with an airless sprayer?

Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.

Can you spray stain with a 515 tip?

Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).

What size tip should I use to spray primer?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

Can you spray stain with an airless sprayer?

An airless sprayer works by pumping paint at a very high pressure, up to 3,000 psi, through a hose and out a tiny hole in the spray gun tip. Using different tips, you can spray thin liquids like stain, lacquer and varnish or thicker liquids like latex house paint.

What size tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

You might be interested:  Question: What Paint To Use In Kitchen Cabinets With A Handheld Paint Sprayer?

What is the best spray tip for walls?

To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials. To paint rooms or houses, a 515 spray tip would do best.

Do I need to thin my paint for airless sprayer?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

Do I spray walls or ceiling first?

Simply spray the ceiling, and let overspray land on the wall and ceiling trim. After the ceiling paint dries, it’s time to paint the walls. Cover the edges with quick-release masking tape and paper — to avoid getting overspray on the ceiling — and start paint spraying the interior walls.

Are airless spray tips Universal?

Airless spray tips require their own tip guard/tip holder. These are usually ⅞ fitting, and they’re interchangeable between the different brand guns.

Can latex paint be sprayed with HVLP gun?

HVLP systems are not designed to spray heavier bodied latex paint. The viscosity (thickness) of latex paint makes it hard for spray guns to fully atomize the paint, meaning that it’s difficult with a lower pressure turbine unit to break the material up into small enough particles to get an ultra smooth surface.

Leave a Reply

Your email address will not be published. Required fields are marked *