FAQ: What Is A Hvlp Paint Sprayer?

What are HVLP paint sprayers used for?

With the hardworking contractor in mind, HVLP paint sprayers (sometimes called turbo-sprayers) are professional paint-spraying equipment ideal for use on trim, finish work, furniture staining, cabinet painting, and any detailed applications where high-accuracy, speed, and a smooth finish are needed.

What is the difference between HVLP and airless sprayers?

In an HVLP (which stands for “high volume, low pressure”), air pumped from an air compressor or turbine atomizes paint. In an airless sprayer, a piston pressurizes the material, which sprays out of an orifice smaller than that found on an HVLP nozzle. The high pressure and tight squeeze shear the paint into particles.

What is the difference between HVLP and conventional spray guns?

Conventional guns use high pressure to produce high volumes of paint, with the PSI values at the inlet the same as the outlet. The reduced pressure of HVLP gun means that you have less overspray and wasted paint but also reduced paint volume.

You might be interested:  How Tobest Clean Airless Paint Sprayer?

What is the advantage of a HVLP spray gun?

As opposed to a conventional spray gun that uses high volume high pressure of air, HVLP saves on the pressure of air that is used. The benefit to this is that it reduces overspray which means you reduce paint waste by about 50%. The end result is that HVLP helps save money.

Which is better HVLP or LVLP?

The FPro LVLP spray gun technology atomizes difficult coatings, higher viscosities, water borne and higher flow rates better than HVLP guns. The LVLP guns applies coatings faster making them better suited for large objects and high production applications.

Do you have to thin paint for a HVLP sprayer?

Latex paint is the most demanding when it comes to straining. They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down.

Is airless better than HVLP?

Vertical spraying: An HVLP is better for vertical spraying small projects than an airless, especially if you’re new to spraying. You’re far less likely to get paint runs because you’re spraying at a much lower pressure. An airless cranked up to 2,000 PSI throws a lot of paint onto the surface quickly.

Do airless sprayers use more paint?

Airless paint sprayers are extremely popular, but also tend to waste more paint on average than other types of spray guns. Your run-of-the-mill airless paint sprayer will waste up to 40% of the paint that you use, and even more if you aren’t operating the spray gun properly.

You might be interested:  FAQ: Titan 440 Airless Paint Sprayer Which Way Does The Gun Filter Go In?

Can you spray latex paint with an HVLP sprayer?

HVLP systems are not designed to spray heavier bodied latex paint. If you look at most professional airless paint sprayers designed for latex paint, they are actually pumps, and use no air.

How big of an air compressor do I need for a HVLP spray gun?

I usually recommend that you use a compressor that has a minimum of 60 gallon tank and produces around 13 CFM.

Can you use a HVLP gun with an air compressor?

Air Can be fed to an HVLP Spray Gun via a turbine unit which uses a series of fans to provide high volumes of air at low pressure to the spray gun. It can also be fed by a traditional air compressor.

Are HVLP spray guns any good?

The high pressure created by the pump allows the guns to spray unthinned latex paint, but it also creates a lot of overspray and fine particles of paint dust in the air. For less overspray and a finer finish on interior projects, HVLP is a better choice.

What would you do if your paint does not spray from your gun or comes out blotchy?

If your paint gun is not spraying paint at all, it’s most likely due to a clog either in the air vent hole or the hose. Clean any dried paint with a toothpick, and use a cleaning solvent to clear any remaining gunk. If you’ve cleaned your paint gun and find that it still isn’t spraying, take a look at the air supply.

Can you paint a car with HVLP spray gun?

In your auto painting career, odds are good that you’ll do much of your work with a high-volume, low-pressure (HVLP) spray gun. They even offer a few improvements that contribute to the safety of the painting professionals who use them.

You might be interested:  What Would You Use To Hook Up To Spray Guns To A Paint Sprayer?

How much pressure does a HVLP gun need?

HVLP, or High-Volume/Low Pressure, uses a high volume of air (typically between 15-26 CFM) delivered at low pressure ( 10 PSI or less at the air cap) to atomize paint into a soft, low-velocity pattern of particles. In most cases, less than 10 psi is needed in order to atomize.

Leave a Reply

Your email address will not be published. Required fields are marked *