FAQ: What Tips Work With Krause And Becker Airless Paint Sprayer?

What tip do you use for an airless sprayer?

Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.

Do Graco spray tips fit Titan?

This only fits Graco RAC X tip guards but Graco tip guards will fit Titan guns. The tips alone aren’t interchangeable within the different guards though.

Will Graco tips fit Krause and Becker?

Krause and Becker Airless Paint Sprayer Parts If you are having difficulty finding Krause & Becker parts, the good news is that many of the parts such as O rings and sprayer tips are interchangeable with other models of paint sprayers such as Titan ControlMax 1700 and 1900 and Graco Sprayers.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

You might be interested:  Question: Graco Magnum Pro X7 Stand Airless Paint Sprayer 261815 And The X17 What Is The Diffrents?

Do airless sprayers use more paint?

Airless paint sprayers are extremely popular, but also tend to waste more paint on average than other types of spray guns. Your run-of-the-mill airless paint sprayer will waste up to 40% of the paint that you use, and even more if you aren’t operating the spray gun properly.

Do I need to thin paint for airless sprayer?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

Are airless paint sprayer tips interchangeable?

Airless spray tips require their own tip guard/tip holder. These are usually ⅞ fitting, and they’re interchangeable between the different brand guns.

Will Graco spray tip fit Wagner?

You can use Graco guards on Wagner spray guns, and Wagner guards on Graco spray guns. FARBMAX and Titan also use the standard 7/8″ thread, so you should be able to use the spray guards across all models and brands.

What is a 315 spray tip used for?

The 315 tip is ideal for fence picket priming and painting. The 6” fan pattern minimizes overspray when spraying pickets.

Are Graco and Titan parts interchangeable?

yes the hoses as long as the connectors are the same size threads as the ones you are replacing,then you are fine,ive heard and seen guys use g-10 guns which is a wagner cheap gun on gracos and titans

You might be interested:  FAQ: How To Spray Paint Furniture Iwth A Paint Sprayer?

What size tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What size tip should I use to spray clear coat?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

What size is a 515 spray tip?

Thus, a 515 tip denotes an orifice measuring 15 thousandths of an inch in diameter.

Leave a Reply

Your email address will not be published. Required fields are marked *