- 1 Do I need a filter for my spray gun?
- 2 Are Graco and Krause and Becker spray tips interchangeable?
- 3 Are airless paint sprayer guns interchangeable?
- 4 What is a 515 spray tip used for?
- 5 Are Graco spray tips compatible with Wagner?
- 6 Are Titan and Graco spray tips interchangeable?
- 7 Do you need to thin paint for airless sprayer?
- 8 Can you leave paint in airless sprayer overnight?
- 9 Can you run paint thinner through a paint sprayer?
- 10 What kind of oil do you use in an airless sprayer?
Do I need a filter for my spray gun?
The filters are necessary for high pressure airless paint spray equipment, because there is some dirty / grains / small particles or dried paint not cleaned thoroughly in previous spraying jobs. There’re 4 different color filters with different mesh for different paint material.
Are Graco and Krause and Becker spray tips interchangeable?
If you are having difficulty finding Krause & Becker parts, the good news is that many of the parts such as O rings and sprayer tips are interchangeable with other models of paint sprayers such as Titan ControlMax 1700 and 1900 and Graco Sprayers.
Are airless paint sprayer guns interchangeable?
Airless spray tips require their own tip guard/tip holder. These are usually ⅞ fitting, and they ‘re interchangeable between the different brand guns.
What is a 515 spray tip used for?
Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.
Are Graco spray tips compatible with Wagner?
You can use Graco guards on Wagner spray guns, and Wagner guards on Graco spray guns. FARBMAX and Titan also use the standard 7/8″ thread, so you should be able to use the spray guards across all models and brands.
Are Titan and Graco spray tips interchangeable?
The tip seats are the same for a Titan gun and a Graco. Some of the Graco tips come with rubber washers instead of plastic, but the metal seats are the same and can be used in either guard. Also the Graco tip guards will fit Titan guns and vice versa.
Do you need to thin paint for airless sprayer?
They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.
Can you leave paint in airless sprayer overnight?
Never leave it pressurised. But you can leave it overnight leaving the gun and intake tube in a bucket of water. Moving the airless a 3/4 inch cap nut fits the end of the intake tube and find those roller wet bags from d.d convenient to put over it so paint doesn’t go everywhere as I usually clean it at home.
Can you run paint thinner through a paint sprayer?
Often one can run some lacquer thinner through the pump for awhile and get out most of the old dried debris if the sprayer does not have too much in it. If your sprayer has a flexible intake tube, flex it, move it around while running the thinner through it to try to dislodge the dried material inside it.
What kind of oil do you use in an airless sprayer?
FARBMAX protective oil for piston pumps and Graco TSL oil are recommended. And there you have it! All the information you need to clean your Airless Sprayer.