Often asked: How To Read The Sizes On Airless Paint Sprayer Tips?

What do the numbers mean on a airless sprayer tip?

The first number, when multiplied by 2, tells you how wide of a fan the tip will create when sprayed at a distance of 12 inches from the surface. The second two numbers are the orifice size of the tip, in thousandths of an inch, that determines how much fluid will leave the spray tip.

How do you read an airless tip?

Airless paint spray tips are sized using a 3 digit number such as 515. The first number has to do with the width of the spraying fan and the last 2 digits refer to the size of the hole or orifice the paint sprays through. For instance a 508 and a 515 both have the same fan width (approx. 10″) but a different size hole.

What is a 515 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

You might be interested:  Readers ask: How To Use A Paint Gun Sprayer?

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What size tip is best for spraying clear coat?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

Are airless paint sprayer tips interchangeable?

Airless spray tips require their own tip guard/tip holder. These are usually ⅞ fitting, and they’re interchangeable between the different brand guns.

How long do airless sprayer tips last?

Generally a RAC X spray tip will spray around 45 gallons of paint before it needs to be replaced. A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.

What size tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

You might be interested:  Quick Answer: How To Use Wagner Model 0600150 Paint Sprayer?

How do I get a smooth finish with an airless sprayer?

Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.

Can you spray stain with a 515 tip?

Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).

Do you use more paint with a sprayer?

Spraying uses more paint because the sprayer atomizes the paint into tiny droplets. Most of the droplets end up on the surface, but many others drift away. This is inherent with paint spraying, and little can be done to control it.

Do I spray walls or ceiling first?

Simply spray the ceiling, and let overspray land on the wall and ceiling trim. After the ceiling paint dries, it’s time to paint the walls. Cover the edges with quick-release masking tape and paper — to avoid getting overspray on the ceiling — and start paint spraying the interior walls.

Do I need to thin my paint for airless sprayer?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

You might be interested:  Question: Wagner Paint Sprayer Power Trac 7.2gph How To Use My Sprayer?

How do you not get lines when spray painting?

How to Avoid Paint Drips and Lines

  1. Use high-quality paint.
  2. Hold the can at least 6-8 inches away.
  3. Don’t do a continuous spray.
  4. Allow coats to dry in between sprays.
  5. Keep fine grain sandpaper on hand.
  6. Allow the piece to dry in a warm area.
  7. More Home Improvement Tips:

Leave a Reply

Your email address will not be published. Required fields are marked *