Often asked: What Is The Difference Between 411 And 413 Spray Tip For Wagner Paint Crew 770 Sprayer?

Are Wagner Spray tips interchangeable?

These are usually ⅞ fitting, and they’re interchangeable between the different brand guns. Graco FFLP fit in the Graco RAC-X holder, while Wagner HEA use the Trade Tip 3 holder (e.g. an FFLP tip will not fit on a Wagner gun without swapping over the tip holder, etc.)

What’s the difference between paint sprayer tips?

Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.

What is a 413 spray tip used for?

Read 0 Reviews Same page link. The Reverse-A-Clean (RAC) 413 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 413 SwitchTip has a 0.013 inch orifice and produces an 8 to 10 inch fan. Reverse the SwitchTip to easily clear clogs.

Is Graco better than Wagner?

Their models are also extremely easy to use. However, if you’re looking for the best handheld paint sprayer for professional finishing jobs, go for a Graco. They come in a superior quality that makes them more reliable and versatile than Wagner.

You might be interested:  Often asked: How To Prime A Wagner Contractor Series Paint Sprayer?

What spray tips fit Wagner?

Wagner have two spray guards, one in black for TradeTip 3 spray tips and one in yellow for low overspray, TwinTip spray tips. In Europe, Wagner also have the black guard in two sizes F Thread 11/16″ and G Thread 7/8″.

What size is a 515 spray tip?

Thus, a 515 tip denotes an orifice measuring 15 thousandths of an inch in diameter.

What is a 311 spray tip used for?

6 inch spray pattern ideal for narrow surfaces such as fences, decks and furniture. The. 011 inch hole size optimal for spraying thinner materials like semi transparent stains, water sealers, stains or polyurethanes. Less overspray shortens cleanup time with less wasted material.

Do I need to thin my paint for airless sprayer?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

What size tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What is the number one rule when using airless spray guns?

A good rule of thumb for an airless spray gun is to hold the gun about 12- 14 inches from the products surface.

Leave a Reply

Your email address will not be published. Required fields are marked *