Often asked: What Tip To Use For Paint On Airless Sprayer?

What is a 515 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What is a 313 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 6 inch spray pattern ideal for narrow surfaces such as fences, decks and furniture.

How do I choose Graco tip?

To Choose The Right Tip For Your Spray Project, Follow These Recommendations: Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.

What is a 315 spray tip used for?

The 315 tip is ideal for fence picket priming and painting. The 6” fan pattern minimizes overspray when spraying pickets.

You might be interested:  How Do You Clean An Dry Airless Paint Sprayer?

How do I get a smooth finish with an airless sprayer?

Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

What tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What tip to use for spraying doors?

The best tip to use for spraying interior doors with an airless sprayer is a 310, or a 312 tip. These tips produce a 6-inch spray fan to coat doors quickly with less overlapping than using a smaller tip.

How do you read an airless tip?

Airless paint spray tips are sized using a 3 digit number such as 515. The first number has to do with the width of the spraying fan and the last 2 digits refer to the size of the hole or orifice the paint sprays through. For instance a 508 and a 515 both have the same fan width (approx. 10″) but a different size hole.

You might be interested:  Readers ask: How To Remove Paint Off Sprayer?

What spray tip should I use for trim?

If you starting out, a 310 spray tip can handle most trim work and cabinets. A 515 for walls. Then you can add a 619 for more coverage for interior walls and ceilings. For new construction a 1221 would be handy too!

Can you spray stain with an airless sprayer?

An airless sprayer works by pumping paint at a very high pressure, up to 3,000 psi, through a hose and out a tiny hole in the spray gun tip. Using different tips, you can spray thin liquids like stain, lacquer and varnish or thicker liquids like latex house paint.

Are Graco tips Universal?

These are usually ⅞ fitting, and they’re interchangeable between the different brand guns. Graco FFLP fit in the Graco RAC-X holder, while Wagner HEA use the Trade Tip 3 holder (e.g. an FFLP tip will not fit on a Wagner gun without swapping over the tip holder, etc.)

What size tip should I use to spray primer?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

Can latex paint be sprayed with HVLP gun?

HVLP systems are not designed to spray heavier bodied latex paint. The viscosity (thickness) of latex paint makes it hard for spray guns to fully atomize the paint, meaning that it’s difficult with a lower pressure turbine unit to break the material up into small enough particles to get an ultra smooth surface.

Leave a Reply

Your email address will not be published. Required fields are marked *