- 1 What is a 515 spray tip used for?
- 2 What tip do you use for an airless sprayer?
- 3 Do Graco spray tips fit Titan?
- 4 Will Graco tips fit Krause and Becker?
- 5 How do I get a smooth finish with an airless sprayer?
- 6 Can you spray stain with a 515 tip?
- 7 What is a 413 spray tip used for?
- 8 Do airless sprayers use more paint?
- 9 Do I need to thin paint for airless sprayer?
- 10 Are airless paint sprayer tips interchangeable?
- 11 Will Graco spray tip fit Wagner?
What is a 515 spray tip used for?
Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.
What tip do you use for an airless sprayer?
Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.
Do Graco spray tips fit Titan?
This only fits Graco RAC X tip guards but Graco tip guards will fit Titan guns. The tips alone aren’t interchangeable within the different guards though.
Will Graco tips fit Krause and Becker?
Krause and Becker Airless Paint Sprayer Parts If you are having difficulty finding Krause & Becker parts, the good news is that many of the parts such as O rings and sprayer tips are interchangeable with other models of paint sprayers such as Titan ControlMax 1700 and 1900 and Graco Sprayers.
How do I get a smooth finish with an airless sprayer?
Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.
Can you spray stain with a 515 tip?
Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).
What is a 413 spray tip used for?
Read 0 Reviews Same page link. The Reverse-A-Clean (RAC) 413 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 413 SwitchTip has a 0.013 inch orifice and produces an 8 to 10 inch fan. Reverse the SwitchTip to easily clear clogs.
Do airless sprayers use more paint?
Airless paint sprayers are extremely popular, but also tend to waste more paint on average than other types of spray guns. Your run-of-the-mill airless paint sprayer will waste up to 40% of the paint that you use, and even more if you aren’t operating the spray gun properly.
Do I need to thin paint for airless sprayer?
They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.
Are airless paint sprayer tips interchangeable?
Airless spray tips require their own tip guard/tip holder. These are usually ⅞ fitting, and they’re interchangeable between the different brand guns.
Will Graco spray tip fit Wagner?
You can use Graco guards on Wagner spray guns, and Wagner guards on Graco spray guns. FARBMAX and Titan also use the standard 7/8″ thread, so you should be able to use the spray guards across all models and brands.