Question: How To Choose A Paint Sprayer Tip?

What is a 515 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What is the best spray tip?

To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials. To paint rooms or houses, a 515 spray tip would do best.

What is a 315 spray tip used for?

The 315 tip is ideal for fence picket priming and painting. The 6” fan pattern minimizes overspray when spraying pickets.

You might be interested:  Question: How To Start A Tradeworks Paint Sprayer?

How do you know what size spray tip to use?

To Choose The Right Tip For Your Spray Project, Follow These Recommendations: Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.

Can you spray stain with a 515 tip?

Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).

Do I spray walls or ceiling first?

Simply spray the ceiling, and let overspray land on the wall and ceiling trim. After the ceiling paint dries, it’s time to paint the walls. Cover the edges with quick-release masking tape and paper — to avoid getting overspray on the ceiling — and start paint spraying the interior walls.

How long does a paint spray tip last?

Generally a RAC X spray tip will spray around 45 gallons of paint before it needs to be replaced. A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.

Do I need to thin my paint for airless sprayer?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

You might be interested:  FAQ: What To Clean Paint Sprayer With When Using Enamel?

What size tip should I use to spray primer?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

What tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What spray tip should I use for trim?

If you starting out, a 310 spray tip can handle most trim work and cabinets. A 515 for walls. Then you can add a 619 for more coverage for interior walls and ceilings. For new construction a 1221 would be handy too!

Are Graco and Titan spray tips interchangeable?

The tip seats are the same for a Titan gun and a Graco. Some of the Graco tips come with rubber washers instead of plastic, but the metal seats are the same and can be used in either guard. Also the Graco tip guards will fit Titan guns and vice versa.

Can latex paint be sprayed with HVLP gun?

HVLP systems are not designed to spray heavier bodied latex paint. The viscosity (thickness) of latex paint makes it hard for spray guns to fully atomize the paint, meaning that it’s difficult with a lower pressure turbine unit to break the material up into small enough particles to get an ultra smooth surface.

Leave a Reply

Your email address will not be published. Required fields are marked *