Question: Krause And Becker 5/8 Horsepower Airless Paint Sprayer How To Use?

What do the numbers mean on a paint sprayer tip?

The first number, when multiplied by 2, tells you how wide of a fan the tip will create when sprayed at a distance of 12 inches from the surface. The second two numbers are the orifice size of the tip, in thousandths of an inch, that determines how much fluid will leave the spray tip.

Do you need to thin paint for a sprayer?

Yes, the latex paint does need to be thinned. Even though latex paint is water-based, it is thicker than the oil-based paint varieties. The thick latex paint needs to be thinned to be able to spray a fine mist of paint. Before applying your paint, it is a good idea to test out the paint’s viscosity.

Is it worth getting a paint sprayer?

The use of airless paint sprayers is particularly worthwhile in large areas because the advantage of the higher working speed. For a long time, the rule of thumb used to be: use a paint sprayer starting from a 3-room apartment and to paint everything smaller than that roller and brush.

You might be interested:  Question: Avoiding Blobs When Using Paint Sprayer?

Do airless sprayers use more paint?

Airless paint sprayers are extremely popular, but also tend to waste more paint on average than other types of spray guns. Your run-of-the-mill airless paint sprayer will waste up to 40% of the paint that you use, and even more if you aren’t operating the spray gun properly.

How long can I leave paint in airless sprayer?

Short 3 days – 3 months This is probably the most common storage method for most airless paint sprayers. Most painting professionals and contractors fall into this time span. Fresh, clean mineral spirits is considered a storage fluid for this time span, use it or another pump preserver such as Graco Pump Armor.

Is airless or HVLP better?

Vertical spraying: An HVLP is better for vertical spraying small projects than an airless, especially if you’re new to spraying. You’re far less likely to get paint runs because you’re spraying at a much lower pressure. An airless cranked up to 2,000 PSI throws a lot of paint onto the surface quickly.

What size is a 515 spray tip?

Thus, a 515 tip denotes an orifice measuring 15 thousandths of an inch in diameter.

What size tip should I use to spray clear coat?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

How do I get a smooth finish with a paint sprayer?

Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.

You might be interested:  Readers ask: How To Use A Paint Sprayer In Scrap Mechanic?

How do you prevent paint lines from spraying?

Here are some tips for removing streaks and disturbances in the spray pattern:

  1. Increase pressure.
  2. Dilute the paint.
  3. Replace worn nozzle (see Airless Q&A #6 – Worn Airless nozzles – Replace the Nozzle in Good Time)
  4. eliminate faults at the pump (eg clean or replace clogged filters)

Leave a Reply

Your email address will not be published. Required fields are marked *