Question: Krause & Becker Airless Paint Sprayer Manual?

Why is my airless paint sprayer not spraying?

Pump inlet screen plugged or air in pump or hose. Remove and clean. Hold spray gun trigger in open position and run unit about 10 seconds until air is purged. Check for siphon tube leak.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

Will Graco tips fit Krause and Becker?

Krause and Becker Airless Paint Sprayer Parts If you are having difficulty finding Krause & Becker parts, the good news is that many of the parts such as O rings and sprayer tips are interchangeable with other models of paint sprayers such as Titan ControlMax 1700 and 1900 and Graco Sprayers.

How do you thin paint a sprayer?

Here’s what you do:

  1. Pour the paint into the bucket.
  2. Add ½ cup of water for every gallon of paint.
  3. Mix thoroughly.
  4. Check the thickness by running the paint through a funnel. If it flows freely through the funnel, you know the paint is thinned enough.

What kind of oil do you use in an airless sprayer?

FARBMAX protective oil for piston pumps and Graco TSL oil are recommended. And there you have it! All the information you need to clean your Airless Sprayer.

You might be interested:  Question: How To Spray Rust-oleum Chalk Paint In Paint Sprayer?

Why is my Wagner paint sprayer not working?

When your Wagner paint sprayer won’t prime there are a few solutions to the problem. It is entirely possible that the priming or spraying valve is clogged with old material and gunk. If it’s not the prime or sprayer valve, it could be either the outlet or inlet valves. These can be unblocked by using the filter tab.

Leave a Reply

Your email address will not be published. Required fields are marked *