Quick Answer: How To Oil Graco Max 2 Paint Sprayer?

What kind of oil do you use in an airless sprayer?

FARBMAX protective oil for piston pumps and Graco TSL oil are recommended. And there you have it! All the information you need to clean your Airless Sprayer.

Can you run paint thinner through a paint sprayer?

Often one can run some lacquer thinner through the pump for awhile and get out most of the old dried debris if the sprayer does not have too much in it. If your sprayer has a flexible intake tube, flex it, move it around while running the thinner through it to try to dislodge the dried material inside it.

Can you run oil based paint through a sprayer?

Can you use oil based paint in a spray gun? Yes, you can spray oil based paints and primers with spray guns. How do you thin oil based paint? Oil based paint is thinned with mineral spirits or turpentine by mixing the paint with the white spirits.

What do you lubricate a spray gun with?

Before replacing the needle, lubricate it with Teflon grease to help protect the packing seal and reduce the wear on the needle.

You might be interested:  How Much Paint Can A Paint Sprayer Save?

Do you oil a spray gun?

Lubricate the air trigger packing just behind the trigger, again with one or two drops of oil; and then hold the gun so gravity will help pull the oil into the packing as the trigger is moved.

What is TSL oil?

Throat Seal Liquid (TSL) prevents paint and coatings from drying onto the displacement rod and packings, extending the life of the pump.

What oil should I use in a sprayer pump?

The recommended oil for a Silvan Comet diaphragm pump is SAE 20W/30 Multigrade oil. this has less cushioning effect between the piston and the diaphragm.

Do you have to dilute paint when using a sprayer?

Is it necessary to Thin Latex Paint for Spraying? Yes, the latex paint does need to be thinned. Even though latex paint is water-based, it is thicker than the oil-based paint varieties. The thick latex paint needs to be thinned to be able to spray a fine mist of paint.

Can I leave paint in sprayer overnight?

Never leave it pressurised. But you can leave it overnight leaving the gun and intake tube in a bucket of water. Moving the airless a 3/4 inch cap nut fits the end of the intake tube and find those roller wet bags from d.d convenient to put over it so paint doesn’t go everywhere as I usually clean it at home.

How long can I leave paint in my Graco sprayer?

Short 3 days – 3 months This is probably the most common storage method for most airless paint sprayers. Most painting professionals and contractors fall into this time span. Fresh, clean mineral spirits is considered a storage fluid for this time span, use it or another pump preserver such as Graco Pump Armor.

You might be interested:  FAQ: How To Use A Power Paint Sprayer?

How do you maintain a sprayer?

* Clean filters and nozzle tips. * Clean the outside of the entire sprayer. * Wipe the motor and pump with a damp cloth. * Check the sprayer for needed replacement parts. The three best pieces of advice for maintaining your equipment is:

  1. Clean the sprayer.
  2. Clean the sprayer.
  3. Clean the sprayer.

Leave a Reply

Your email address will not be published. Required fields are marked *