Quick Answer: How To Repair Graco Paint Sprayer?

Why is my airless paint sprayer not spraying?

Pump inlet screen plugged or air in pump or hose. Remove and clean. Hold spray gun trigger in open position and run unit about 10 seconds until air is purged. Check for siphon tube leak.

Why is my Graco sprayer not working?

Chances are the spray tip is clogged. Turn the spray tip 180 degrees to the unclog position. Then, aim the spray gun into a bucket and pull the trigger for one second to blast out the clog. Turn the spray tip back to the spray position and get back to the job.

Why does my Graco paint sprayer spit?

Spray guns spit when air is being introduced into the fluid outside of at the air cap. A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.

What would cause a paint sprayer to not prime?

If the siphon hose has a hole in it or is not tightly secured to the airless sprayer the system may not be sealed and as a result, may suck air in while trying to pick up material. This can lead to the system not pressurizing well.

You might be interested:  Readers ask: Which Graco Paint Sprayer To Buy?

Why is my Wagner paint sprayer not working?

When your Wagner paint sprayer won’t prime there are a few solutions to the problem. It is entirely possible that the priming or spraying valve is clogged with old material and gunk. If it’s not the prime or sprayer valve, it could be either the outlet or inlet valves. These can be unblocked by using the filter tab.

Why does my airless paint sprayer leaving streaks?

The main causes of streaks and disturbances in the spray pattern when using Airless devices are: Pressure set too low. Nozzle worn. Material supply disrupted (eg clogged filters)

What would you do if your paint does not spray from your gun or comes out blotchy?

If your paint gun is not spraying paint at all, it’s most likely due to a clog either in the air vent hole or the hose. Clean any dried paint with a toothpick, and use a cleaning solvent to clear any remaining gunk. If you’ve cleaned your paint gun and find that it still isn’t spraying, take a look at the air supply.

Leave a Reply

Your email address will not be published. Required fields are marked *