Quick Answer: On A Graco Pro 17 Airless Paint Sprayer What Tip To Use For Spraying 6 In Curbs?

What is the difference between a 515 and 517 spray tip?

For example, a 515 tip will spray a 10-inch-wide fan and have a 15-thousandths of an inch orifice. Because the same amount of paint is leaving the orifice of the spray tip, but is being dispersed across a wider fan, the 517 tip will deliver a thinner coating with less mil build.

What size spray tip should I use?

Spray tip size is designated by three numbers. Take the first digit; double it and this will give you the width of the spray fan in inches. For example, a 515 tip will give you a spray fan pattern 10 inches wide (2 x 5) when the sprayer is approximately 12 inches (30 cms) from the surface.

What is a 515 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

You might be interested:  Where Is Rexbeti Ultimate-750 Paint Sprayer Made?

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

Can you spray stain with an airless sprayer?

An airless sprayer works by pumping paint at a very high pressure, up to 3,000 psi, through a hose and out a tiny hole in the spray gun tip. Using different tips, you can spray thin liquids like stain, lacquer and varnish or thicker liquids like latex house paint.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

What size tip should I use to spray primer?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Clearcoats should be sprayed with a 1.3 to 1.7 nozzle.

How long does a spray tip last?

Generally a RAC X spray tip will spray around 45 gallons of paint before it needs to be replaced. A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.

You might be interested:  Readers ask: How To Unclog A Paint Sprayer Campbell Haustfeld Gun Suction Tubing?

What size tip should I use to spray lacquer?

We generally recommend a 1.7 or 1.8 mm for standard wood lacquers and pigmented lacquers. For the thinner lacquers, we recommend a 1.5 or 1.6mm tip set. Many other factors will affect your choice in tip. However, since your gun has the other tips available, you are in good shape.

Can you spray stain with a 515 tip?

Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).

How do I get a smooth finish with an airless sprayer?

Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.

What tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

Do I need to thin my paint for airless sprayer?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

You might be interested:  How Long Can You Leave Paint In An Airless Sprayer?

Do I spray walls or ceiling first?

Simply spray the ceiling, and let overspray land on the wall and ceiling trim. After the ceiling paint dries, it’s time to paint the walls. Cover the edges with quick-release masking tape and paper — to avoid getting overspray on the ceiling — and start paint spraying the interior walls.

Are Graco and Titan spray tips interchangeable?

The tip seats are the same for a Titan gun and a Graco. Some of the Graco tips come with rubber washers instead of plastic, but the metal seats are the same and can be used in either guard. Also the Graco tip guards will fit Titan guns and vice versa.

Leave a Reply

Your email address will not be published. Required fields are marked *