- 1 What tip do you use for an airless sprayer?
- 2 What is a 515 spray tip used for?
- 3 What size tip should I use to spray lacquer?
- 4 Do airless sprayers use more paint?
- 5 What tip should I use to spray cabinets?
- 6 Can you spray stain with a 515 tip?
- 7 How do I get a smooth finish with an airless sprayer?
- 8 How long does a spray tip last?
- 9 Do I need to thin my paint for airless sprayer?
- 10 Are Graco and Titan spray tips interchangeable?
- 11 What is a 211 spray tip used for?
- 12 Can you spray base coat with a 1.3 tip?
- 13 Can you spray latex paint with an HVLP sprayer?
- 14 What causes orange peel in paint?
What tip do you use for an airless sprayer?
Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.
What is a 515 spray tip used for?
Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.
What size tip should I use to spray lacquer?
We generally recommend a 1.7 or 1.8 mm for standard wood lacquers and pigmented lacquers. For the thinner lacquers, we recommend a 1.5 or 1.6mm tip set. Many other factors will affect your choice in tip. However, since your gun has the other tips available, you are in good shape.
Do airless sprayers use more paint?
Airless paint sprayers are extremely popular, but also tend to waste more paint on average than other types of spray guns. Your run-of-the-mill airless paint sprayer will waste up to 40% of the paint that you use, and even more if you aren’t operating the spray gun properly.
What tip should I use to spray cabinets?
Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.
Can you spray stain with a 515 tip?
Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).
How do I get a smooth finish with an airless sprayer?
Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go! Here’s a quick video to demonstrate how I spray paint and get a flawless finish every time.
How long does a spray tip last?
Generally a RAC X spray tip will spray around 45 gallons of paint before it needs to be replaced. A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.
Do I need to thin my paint for airless sprayer?
They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.
Are Graco and Titan spray tips interchangeable?
The tip seats are the same for a Titan gun and a Graco. Some of the Graco tips come with rubber washers instead of plastic, but the metal seats are the same and can be used in either guard. Also the Graco tip guards will fit Titan guns and vice versa.
What is a 211 spray tip used for?
The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.
Can you spray base coat with a 1.3 tip?
For spraying a whole car, a 1.3mm tip is recommended. The 1.4mm tip is perfect for base coats and metallic as the droplet size allows the particles to self-orient to eliminate streaking and mottling.
Can you spray latex paint with an HVLP sprayer?
HVLP systems are not designed to spray heavier bodied latex paint. If you look at most professional airless paint sprayers designed for latex paint, they are actually pumps, and use no air.
What causes orange peel in paint?
Orange peel is typically the result of improper painting technique, and is caused by the quick evaporation of thinner, incorrect spray gun setup (e.g., low air pressure or incorrect nozzle), spraying the paint at an angle other than perpendicular, or applying excessive paint.