Readers ask: How To Install Pusher Assembly On A Titan 440 Paint Sprayer?

Which is better Graco or Titan?

The winner here is Graco, at least with the two sprayers I own. Performance wise, the Contractor and RX-80 spray guns by both companies are great, but the filters in the gun and manifold of my Graco sprayers are a lot faster to disassemble and clean than Titan.

What tip do you use for an airless sprayer?

Choose a tip with an orifice size rated for the paint or coating you’ll be spraying. Light coatings such as lacquers, stains, and enamels require a small tip, while heavier coatings such as texture require larger spray tips.

Is it worth getting a paint sprayer?

The use of airless paint sprayers is particularly worthwhile in large areas because the advantage of the higher working speed. For a long time, the rule of thumb used to be: use a paint sprayer starting from a 3-room apartment and to paint everything smaller than that roller and brush.

How do you dilute a paint sprayer?

Here’s what you do:

  1. Pour the paint into the bucket.
  2. Add ½ cup of water for every gallon of paint.
  3. Mix thoroughly.
  4. Check the thickness by running the paint through a funnel. If it flows freely through the funnel, you know the paint is thinned enough.

Do I need to thin paint for sprayer?

Yes, the latex paint does need to be thinned. Even though latex paint is water-based, it is thicker than the oil-based paint varieties. The thick latex paint needs to be thinned to be able to spray a fine mist of paint. Before applying your paint, it is a good idea to test out the paint’s viscosity.

Leave a Reply

Your email address will not be published. Required fields are marked *