Readers ask: How To Use Graco Magnum X7 Airless Paint Sprayer?

What tip does the Graco X7 come with?

The Graco X7 comes with a 515 RAC IV Spray Tip out of the box. This provides a 10″ spray width and a 0.015″ (thou) orifice. A 515 spray tip is suitable for most latex and exterior paints, however, you may wish to purchase a smaller tip size for more detailed painting projects.

How do you prime a Graco X7 sprayer?

Prime the Pump Place the fluid intake hose into a paint pail and place the drain tube into a waste pail. Be sure the prime valve is in the PRIME, or DRAIN, position. Turn the pressure control to the lowest pressure setting. Turn the on/off switch to ON.

What is the best Graco paint sprayer?

The Graco TrueCoat 360 DS Paint Sprayer is the best overall Graco paint sprayer because of its durability and several features that make painting easier than ever. One of its best features is its two-speed switch. There’s a low speed that helps you have more control over the sprayer.

How can I spray my walls without hitting the ceiling?

How to Spray Walls without Hitting Ceiling

  1. Assemble the necessary tools and materials.
  2. Put on your safety gear.
  3. Cover the floors and window corners.
  4. Mask along the ceiling corners.
  5. Start spraying your walls.
  6. Leave the paint to dry.
  7. Clean your workspace.
  8. Conclusion.
You might be interested:  FAQ: How To Repair Graco Paint Sprayer Xr9?

Is the Graco X5 a good sprayer?

In online reviews, owners of the Graco X5 praise its comfortable and accurate SG2 spray gun, are impressed by its compact design yet powerful 3000 PSI output, and welcome the flush-through easy-clean feature. Although, not everyone was impressed.

What is the best Graco tip for painting cabinets?

When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What is a 311 spray tip used for?

6 inch spray pattern ideal for narrow surfaces such as fences, decks and furniture. The. 011 inch hole size optimal for spraying thinner materials like semi transparent stains, water sealers, stains or polyurethanes. Less overspray shortens cleanup time with less wasted material.

What is a 517 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

Why does my airless paint sprayer leaving streaks?

The main causes of streaks and disturbances in the spray pattern when using Airless devices are: Pressure set too low. Nozzle worn. Material supply disrupted (eg clogged filters)

Leave a Reply

Your email address will not be published. Required fields are marked *