Readers ask: Which Wagner Paint Sprayer Tip?

What spray tips fit Wagner?

Wagner have two spray guards, one in black for TradeTip 3 spray tips and one in yellow for low overspray, TwinTip spray tips. In Europe, Wagner also have the black guard in two sizes F Thread 11/16″ and G Thread 7/8″.

What is the difference between a 515 and 517 spray tip?

For example, a 515 tip will spray a 10-inch-wide fan and have a 15-thousandths of an inch orifice. Because the same amount of paint is leaving the orifice of the spray tip, but is being dispersed across a wider fan, the 517 tip will deliver a thinner coating with less mil build.

What is a 515 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What is a 313 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 6 inch spray pattern ideal for narrow surfaces such as fences, decks and furniture.

You might be interested:  FAQ: How To Use The Finish Max Super Paint Sprayer?

Why is my Wagner paint sprayer spitting paint?

Spray guns spit when air is being introduced into the fluid outside of at the air cap. A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.

Are Wagner and Graco spray tips interchangeable?

These are usually ⅞ fitting, and they’re interchangeable between the different brand guns. Graco FFLP fit in the Graco RAC-X holder, while Wagner HEA use the Trade Tip 3 holder (e.g. an FFLP tip will not fit on a Wagner gun without swapping over the tip holder, etc.)

Can you spray stain with an airless sprayer?

An airless sprayer works by pumping paint at a very high pressure, up to 3,000 psi, through a hose and out a tiny hole in the spray gun tip. Using different tips, you can spray thin liquids like stain, lacquer and varnish or thicker liquids like latex house paint.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

Can you spray stain with a 515 tip?

Fill your Wagner paint sprayer with your deck stain. Note: The Control Pro 130 comes with a 515 spray tip that is great for latex paint. If you’re applying stain, you’ll need a 313 HEA spray tip for stains (sold separately) or 211 HEA spray tip for sealers (sold separately).

You might be interested:  Often asked: How To Use A Paint Sprayer Comment?

How long does a spray tip last?

Generally a RAC X spray tip will spray around 45 gallons of paint before it needs to be replaced. A RAC IV or RAC V spray tip will last for approximately 40 gallons. All tips will vary depending on pressure that the user is spraying at the the type of paint being sprayed.

Do you use more paint with a sprayer?

Spraying uses more paint because the sprayer atomizes the paint into tiny droplets. Most of the droplets end up on the surface, but many others drift away. This is inherent with paint spraying, and little can be done to control it.

What tip should I use to spray cabinets?

Spray Tip Selection When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.

What tip to use for spraying doors?

The best tip to use for spraying interior doors with an airless sprayer is a 310, or a 312 tip. These tips produce a 6-inch spray fan to coat doors quickly with less overlapping than using a smaller tip.

How do you read an airless tip?

Airless paint spray tips are sized using a 3 digit number such as 515. The first number has to do with the width of the spraying fan and the last 2 digits refer to the size of the hole or orifice the paint sprays through. For instance a 508 and a 515 both have the same fan width (approx. 10″) but a different size hole.

Leave a Reply

Your email address will not be published. Required fields are marked *